Ankündigung Changelog 2018-09-26: Fishing, boats and more!

    • "After the update, the character has become taller. Please, return the previous growth, but because of this, I now can not normally go into rooms with low ceilings. Because of this, I can not climb into the pipes, the character does not fit into the space at all."

      Keep in mind, you can crouch to reduce your height. I think the reason our character is larger is it is part of the fix to prevent you from seeing through terrain and walls in certain circumstances. I would much rather have a larger character than be able to see through terrain and walls as it kills the PvP experience and makes it waaay too easy to find underground dungeons.
      "The past is history, the future a mystery, but today is a gift, which is why we call it the Present."
    • Radiohead schrieb:

      After the update, the character has become taller. Please, return the previous growth, but because of this, I now can not normally go into rooms with low ceilings. Because of this, I can not climb into the pipes, the character does not fit into the space at all.
      The fact that you could until now do those things at those height was the bug. This bug has been fixed now so unfortunately the only thing I can say is from now on build higher structures :/

      PS: the doors always were 4 blocks high so that should have given everyone an indication of what proper height was for structures. Also remember this is Alpha so things can change over time even unexpectedly.
      Admin on Artisan's Realm
      Rising World Projects:
      Blueprint Texture Editor
      MailingSystem
      ServerTools
      Portals
    • Minotorious schrieb:

      Radiohead schrieb:

      After the update, the character has become taller. Please, return the previous growth, but because of this, I now can not normally go into rooms with low ceilings. Because of this, I can not climb into the pipes, the character does not fit into the space at all.
      The fact that you could until now do those things at those height was the bug. This bug has been fixed now so unfortunately the only thing I can say is from now on build higher structures PS: the doors always were 4 blocks high so that should have given everyone an indication of what proper height was for structures. Also remember this is Alpha so things can change over time even unexpectedly.
      But it is strange that, in appearance, a normal aperture does not make it possible to go through and you have to sit down. And in the pipe, it’s not even possible to sit in a pipe, although it is felt that you only touch the opening with the crown of the head. 2 centimeters? - sorry, but you are too tall. Because of this, so many problems, all the plans just broke into smithereens, all because of the dubious fix with growth.
      Would make several options, like in ARMA3, so that you can crawl in low openings, but somehow it spoils the gameplay, what you see is a surmountable obstacle, but you do not miss 2 cm.
      Below I gave an example of an "insurmountable obstacle"
    • I understand your pain. However it is just a temporary pain. In the future you will adjust to the new height and on the long run it is very likely you will lose your worlds anyways. As when the world generation is getting updated all will be gone. You can save buildings with a blueprint of course - but this is also a chance:

      Save your building as blueprint, but without the floor. Then delete your current building aside the first layer of blocks. Then again add the blueprint on top of the lowest layer of blocks and now you have a higher building.

      Doesn´t work for everything of course and it is quite some effort but its worth a try.

      About the 2cm.. yea, thats a pity but its a computer game, not reality. don´t compare these in too big details. What you are talking about is not possible (yet). In other games you have crouching, kneeling, etc. But even then it is for a certain determined height. If the tunnel/ceiling is just 1cm lower - your attempt to get through will fail.

      Take it as a learning experience and adjust your buildings from now on. After a while you won´t even notice it anymore.
    • Red51 help.

      We have a problem with the water not showing when in a protected area. The water outside the area will not show when you are standing in the claimed area when showarea is on. Same if you are standing outside the area, the water inside the area is gone until you turn showareas off. Since yahgiggle and Miwarre are both MIA, you are the only 1 to report this to. I have been away and a bit busy also or I would have caught this before now. This happens with both area protection lua script 3.0 as well as the java area protection of miwarre's. With it happening to both area protections it is probably game related.
    • GTX 970 user here. AP lua 3.0, this problem for me, only occurs if I am standing outside the area (the water is gone, revealing lakebed) with /showareas on. BUT inside I can see the water render fine with /showareas on. The borders seem to cause some type of render issue, results may vary AMD vs Nvidia, settings etc. I run at 1080p max settings. If this helps any.

      On a side note, I wouldn't consider this a serious issue, aside some players may use to to reveal hidden goodies in pond. :)

      A more serious issue I know of that cropped up since latest update is with blueprints. Spawn in BP .. use undoblueprint command OR demolish by hand. log off server. log back in, BP is back. Often times its just a partial, other times complete BP you undid before logoff. Seems to be pulling from old cache.

      Also, another one I find some pvp players will exploit to kill or raid, is the render issue. I don't want to get into specifics here for obvious reason, but will send Red a PM about how to reproduce it.
      "The past is history, the future a mystery, but today is a gift, which is why we call it the Present."
    • I'm agree with "Radiohead". This "fix" useless. because of some dubious "fix" spoil gameplay. Why did the squat height was changed ? :thumbdown: I appeal to the developers specifically! return the previous high of character when it is in a squat :| Because I cant spill into pipes, and I spent enough time on them to build.

      Please, fix this "fix".
    • Neu

      ViciousKanid schrieb:

      Do you have an updated list of commands to spawn in some of the new items?
      Sorry for the late response, not sure if you're still looking for the commands, but here is a small list ;)
      Spoiler anzeigen
      Rifle: item m14 1 Ammo: item ammom14 1
      Bomb/Grenade: item bomb 1
      Fishing rod: item fishingrod 1 Bait: item earthworm 1
      Fish: item salmonraw 1, item perchraw 1, item plaiceraw 1, item herringraw 1, item catfishraw 1, item tunaraw 1
      Rubberduck: item rubberduck 1
      Boot: clothing oldboot
      Rowboat: vehicle rowboat RIB: vehicle rib
      Boat construction kits: item rowboatkit1 1, item rowboatkit2 1, item rowboatkit3 1 and item ribkit 1, item ribkit2 1

      To get an item bag (containing an item), you can use the command:
      itembag <itemname1> <itemname2>..., e.g. itembag rubberduck. You can spawn as many items in the bag as you want ^^


      Radiohead schrieb:

      After the update, the character has become taller. Please, return the previous growth, but because of this, I now can not normally go into rooms with low ceilings
      Yes, that's unfortunately true. This definitely needs some more fine tuning. However, if you're playing singleplayer (this does not work in multiplayer unfortunately), you can disable this behavior. To do that, go to your game directory, open the "config.properties" file with a text editor and set game_no_sweeptest to true, then save the file and run the game again :)

      sharkbitefischer schrieb:

      We have a problem with the water not showing when in a protected area. The water outside the area will not show when you are standing in the claimed area when showarea is on
      This is unfortunately caused by the rendering order (water is rendered as post processing effect). We need to find a way to change the rendering order without wasting too much performance on this.

      Juggernaut schrieb:

      A more serious issue I know of that cropped up since latest update is with blueprints. Spawn in BP .. use undoblueprint command OR demolish by hand. log off server. log back in, BP is back
      There is indeed an issue with blueprints, especially when using the "undobp" command. We're working on a solution :)
    • Benutzer online 2

      2 Besucher