Can't remove paper from the press.
@red51 may I respectfully request that you engage with this issue. I am unable to play on the mentioned server while this problem persists, and am rather disappointed that I can't.
I note that I have experienced this issue on other servers also (log off then stuck at 10% and can't get back in until server is restarted) so it is not unique to Icon58.
Various players along with admin have expended much effort in trying to resolve this matter and now are quite dependent on your advice and assistance.
** Any idea how to switch the game from Celcius to Farenheit? I do not understand celsius.
0 = freezing
10 = warm coat and hat
20 = jeans and shirt
30 = shorts & Tee
40 = where the hell is the shade and pass me a cold beer
If I was offended I would have said so. I was not.
I have never made a video of any sort and don't care to start learning a new skill over this.
My time in game is over 2000 hrs although I see no reason why time in game is relevant to this issue. I also have never seen this before.
I assure you the problem is not a miss click or anything like it. I have used more than 50 planks in failed attempts over several sessions to place this one - hardly likely to miss click 50+ times. As I said above I have placed thousands of planks successfully. Including the ones on the top of this slope, the edge of which can be seen in the pics.
You can clearly see in the pics that I have correctly positioned the plank before placing and that it is still properly oriented after wrong placement. Surely this would not be the case if I had miss clicked - whatever that is.
However please accept my thanks for trying to help
I have done a lot of PnB construction and placed thousands of planks, including many in the exact same way as I am attempting here. Placing this plank should be simple.
I do not think it is my method at fault. There is something else going on but I have no idea what it could be.
Did you fix the plank in place with right ctrl and then used keys to adjust position and angle?
It should work that way. After all you can move planks inside other objects too like this.
Yes indeed I tried every which way.
If you're working on a roof you could try to change the rotation in the console.
There are 3 rotations; rotation world, rotation legacy and rotation local.
Maybe this could solve your problem.
Thanks for suggestion.
Tried all 3 without success.
Although I have many times before placed planks in this orientation, I can't get it to work this time.
I am trying to place barge boards on a new workshop. I correctly angle the plank to the pitch of the roof but every time I place it the board snaps to horizontal.
I have tried every variation I can think of. Prepositioned and not. Different standing positions (view angles). Different plank materials. Fly mode or not.
In the first pic you can see where the plank is correctly angled before placement. In the second pic I have placed the plank and the preview is still at the correct angle despite the placement being wrong.
Swearing at it has not helped at all
This is on a multiplayer server using stand alone game.
Any help will be appreciated.
What you need is to craft a blueprint at your workbench and have it selected in your hot bar - then go to journal and use it.
@the radioman03, so far I have found one ruin on my server. I have flown all over TP to different points and fly back, just haven't any luck.
I flew around randomly on D1 for about half hour and found 3 shacks, So they are there,
I have just started using this since its recent installation on one of the servers I play. It is fantastic in so many ways, not least in avoiding me being a pain to the admins requesting them to make planks all the time for me.
I am also expecting it will lift the standard of building within the whole community.
So yesterday I made a lot of fence with custom beams and planks. This required about 10 stacks of plank fence paling's. Add on the beams for posts and rails and I had well over 700 mouse clicks to complete the purchase. Poor mouse was very tired! Needed extra cheese rations.
Therefore I wondered if you could do anything to enable bulk buy - perhaps like we do at at the saw bench have a max button to buy a full stack with one click.
My mouse would appreciate it very much.
Some might call it a bug.
But if you lay a diagonal path, BP it then rotate 180 it will reconfigure the ramp blocks into a more decorative style.
And another using BP
Following the patch to the update I have not experienced this again.
Solved I think.
I spoke too soon.
Has since happened twice.
1st when using a BP
2nd not BP'ing
Log captured for 2nd - attached
A new status update as well as a first preview video of the new version are now available!